气体温度
temperature───n.温度;体温;气温;发烧
gas───vi.加油;放出气体;空谈;n.(Gas)人名;(法、德、西)加斯;vt.加油;毒(死);n.气体;[矿业]瓦斯;汽油;毒气
critical temperature───[物][电子]临界温度;n.临界温度
temperature outside───室外温度
temperature rise───[电]温升;温度上升;温度上升,温升,升温
constant temperature───[热]恒温;定温;等温;等温,恒温
fluctuating temperature───波动温度;脉动温度;脉动温度,波动温度
low temperature───低温,低温度;[物]低温
annealing temperature───[机]退火温度;退火点;退火点,退火温度
diameter of actual tangent circle is an important parameter for safety of boiler, the residual rotation is the key factor of flue gas temperature deviation at furnace exit.───实际切圆直径是锅炉稳定安全运行的一个重要参数,炉膛出口残余旋转是造成烟温偏差的主要原因。
rise in the temperature of the gas results in its expansion.───气体温度上升致使气体膨胀。
The experiment said the gas didn't increase its temperature when it expanded the vacuum.───这个实验说明,当气体在向真空膨胀的过程中,其温度没有升高。
The slag skull thickness is not uniform on the surface of the stave. The extend of nonuniformity increases with gas temperature rising.───渣皮在冷却壁表面分布不均匀,随着炉气温度升高渣皮不均匀性逐渐增加。
The exhaust gas temperature is an index for the economy estimation of a thermal power plant.───排烟温度是衡量热源厂热经济性的一个指标。
however , for certain temperature sensitive materials the inlet gas temperature must be lowered.───但是,对于某些温度敏感的材料,进入的气体温度必须降低。
Operation of the catalyst device is controlled based upon the predicted exhaust gas temperature profile.───基于预测废气温度分布控制催化剂装置的运行。
The result shows that gas temperature near the stave is the main factor that affects heat transfer and slag skull thickness.───结果表明,复合冷却壁附近炉气温度是影响其传热行为和渣皮厚度的主要因素。
An evaporator fitted on a model combustor is investigated to provide uniform circumferential gas temperature profile.───本文介绍一种为环形燃烧室提供油蒸汽的蒸发室。
The results indicate that the combustion gas temperature plays the most important role on the ignition capability of the torch igniter.
The vapor liquid two boundary layer model is applied to predict local mass concentration of the non condensable gas, temperature profiles and velocity profiles in the boundary layer.
It is confirmed that, the operation level of stoker boilers can be improved such as enhancing the combustion intensity, boiler thermal efficiency and flue gas temperature of furnace outlet.
The effects of gas temperature fluctuation on the devolatilization of pulverized coal particles with different diameters are explored under different time-averaged gas temperature.
The increase in the fluctuation intensity of gas temperature will further enhance the instantaneous particle mass loss during the coal devolatilization processes.
The influence of the rotational speed of the feeder and position of the secondary air damper on the distribution of the gas temperature in the burner region is gotten.
The position of the cohesive zone, pressure drop and top gas temperature are affected by both air blast rate and combustion temperature.
However, for certain temperaturesensitive materials the inlet gas temperature must be lowered.
For the ECE method, the gas temperature is calculated based on gas components and their enthalpy.
- gas tanker
- gas theory
- gas system
- gas thermometer
- gas thermometry
- gas transfer
- gas thermometre
- gas transmission
- gas transmission rate
- gas tube
- gas treating process
- gas transmission cell
- gas transmission line
- gas turbine aircraft
- gas turbine
- gas turbine engine
- gas turbine fuel
- gas turbine jet
- gas turbine module
- gas turbine starter
- gas turbines