Surface roughness comparison table
表面粗糙度───Surface roughness;对照表───Comparison table
Friction increases with increasing fiber surface roughness in the boundary and semiboundary.───在边界和半边界区内,摩擦随纤维表面粗糙度的增加而增加.
The contribution of the guide surface roughness overshadows that of the fiber surface roughness.───导纱杆表面粗糙度的作用超过纤维表面的粗糙度.
Annual variation of surface roughness obtained from wind profile measurements.───根据风廓线测量获得的地面粗糙度的年度变化.
It was also found the surface roughness in gas is better that in emulsion.───同时发现,在相同加工条件下,气中加工的粗糙度普遍优于液中加工.
Understand the basic conception of form and position tolerance and surface roughness.───了解形位公差与表面粗糙度基本概念.
Results show that this process can reach surface roughness with angstrom dimension.───结果表明,这种抛光工艺能获得原子级的超光滑表面.
At the beginning of machining, the metal is removed rapidly and the surface roughness descends quickly.───试验还表明在加工初期具有较高的金属去除率,表面粗糙度也下降较快.
The surface roughness increases first and then decreases as surface density increase.───表面粗糙度在两个系统中都是随著表面密度先升后降.
Methods The surface roughness of 24 teeth treated with air-flow was observed under light wave interference microscope. Then the effect of prophylaxis paste on these surface were analyzed.
Surface roughness is one of the significant machining characteristics in the finish cut of WEDM.
The surface roughness increases first and then decreases as surface density increase.
The contribution of the guide surface roughness overshadows that of the fiber surface roughness.
The results demonstrate that when surface roughness increases, the load capacity and the frictional force of surface asperities increase, but the oil film-thickness ratio decreases.